4 - installing the dl50, Chapter objectives, Mounting dimensions – Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL User Manual
Page 26: Installing the dl50
Advertising
A–B
4
Chapter
4–1
Installing the DL50
This chapter describes how to mount the DL50. Instructions are also
provided on connecting the DL50 to communications lines and power
source.
Figure 4.1 shows the mounting dimensions of the displays.
Figure 4.1
Mounting Dimensions
Catalog No. 2706-F11J, -F11JC
13/16 inches
(21.0 mm)
24 3/4 inches
(629 mm)
Catalog No 2706-F21J, -F21JC
3/4 inches
(19 mm)
40.4 inches
(1026.2 mm)
76.0 inches
(1930.4 mm)
19 3/16 inches
(487 mm)
24 3/4 inches
(629 mm)
24 3/4 inches
(629 mm)
37 1/8 inches
(943 mm)
10 11/16 inches
(271 mm)
19 3/16 inches
(487 mm)
10 11/16 inches
(271 mm)
Chapter Objectives
Mounting Dimensions
Advertising