Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL - Manual (Page 29)

Chapter 4
Installing the DL50
4–4
Wall Mounting- Using Adjustable Brackets (Catalog No. 2706-NJ3)
Mount the DL50 to a wall using Adjustable Brackets (Catalog No.
2706-NJ3) as shown in Figure 4.3.
Note: Catalog No. 2706-NJ3 contains 2 pairs of brackets. You will need 2
pairs of brackets to mount Catalog No. 2706-F11J, -F11JC and 4 pairs of
brackets to mount Catalog No. 2706-F21J, -F21JC.
Figure 4.3
Wall Mounting With Adjustable Brackets
Angle Adjustment Pin
Pivot Bolt
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
БББББ
Screw
Wall Anchor
К
К
К
К
ЙЙ
ЙЙ
ЙЙ
ЙЙ ЙЙЙ
Mounting Bracket
(Catalog No. 2706-NJ3)
Screw, Lockwasher, Nut
ÉÉÉ
DL50
To adjust the viewing angle:
1) Support DL50 and remove Angle Adjustment Pin (see Figure 4.3)
2) Position DL50 at the proper angle.
3) Align bracket holes and re-insert Angle Adjustment Pin.