Chain suspension – Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL User Manual
Page 30
Chapter 4
Installing the DL50
4–5
The DL50 can be suspended from a pair of chains. Each chain must be
capable of supporting:
400 pounds (182 kilograms) for Catalog No. 2706-F11J, -F11JC
750 pounds (341 kilograms) for Catalog No. 2706-F21J, -F21JC
!
ATTENTION: Make sure the supporting chain meets the
minimum specifications listed above. Failure to follow this
warning could result in damage to the display and personal injury.
Figure 4.4
Chain Suspension
Adjust Length of This Chain
To Change Viewing Angle
Chain Must Be Able To Support:
400 pounds (182 kg) when hanging
Catalog No. 2706-F11J, -F11JC Displays
750 pounds (341 kg) when hanging
Catalog No. 2706-F21J, -F21JC Displays
DL50
Angle Mounting Bracket
Note: The angle mounting bracket may be removed for chain-suspended
installations.
Chain Suspension