Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL - Manual (Page 8)

Chapter 1
Using This Manual
1–2
Only qualified service personnel may configure and install Dataliner DL50
Message Displays. No operator access to internal configuration switches or
connectors is required.
The following conventions are used:
•
The Catalog No. 2706ĆF11J, ĆF11JC, ĆF21J, and ĆF21JC DL50 Series
Marquee Message Displays are referred to as the DL50.
•
When an ASCII character (printable or nonĆprintable) is specified, the
character is always followed by the decimal equivalent in parentheses. Refer
to Appendix B for an ASCII conversion chart.
For example: When the DL50 receives a CtrlĆF (decimal 6), it clears
the buffer.
•
DL50 displays are shown in a box. For example:
Motor ON
An Attention symbol in this manual draws your attention to information that
is especially important.
!
ATTENTION: Identifies information about practices or
circumstances that can lead to personal injury or death, property
damage, or economic loss.
If the DL50 is installed within the European Union, Appendix H gives the
legal requirements.
Intended Audience
Conventions Used
Attention Symbol
CE Directives