Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL - Manual (Page 33)

Chapter 4
Installing the DL50
4–8
Figure 4.6
Back to Back Mounting With Adjustable Brackets
К
К
К ЙЙ
ЙЙ
Adjustable Brackets
(Catalog No. 2706-NJ3)
К
К
К Й
Й
Chains Must Be Able To Support:
400 pounds (182 kg) when hanging two
Catalog No. 2706-F11J, -F11JC Displays
750 pounds (341 kg) when hanging two
Catalog No. 2706-F21J, -F21JC Displays
Chain Must Be Able To Support :
800 pounds (364 kg) when hanging two
Catalog No. 2706-F11J, -F11JC Displays
1500 pounds (682 kg) when hanging two
Catalog No. 2706-F21J, F21JC Displays
DL50
DL50
Angle
Adjustment Pin
Note: Catalog No. 2706-NJ3 contains 2 pairs of brackets. You will need 2
pairs of brackets to mount Catalog No. 2706-F11J, -F11JC and 4 pairs of
brackets to mount Catalog No. 2706-F21J, -F21JC.
To adjust the viewing angle:
1) Support DL50 and remove Angle Adjustment Pins (see Figure 4.6).
2) Position DL50 at the proper angle.
3) Align bracket holes and re-insert Angle Adjustment Pins.