Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL - Manual (Page 122)

A–B
G Appendix
G-1
CHARACTER ATTRIBUTE WORKSHEET
DUPLEX FIELD 6 CALCULATION
Enter the values corresponding to the desired attributes on the spaces to the right.
Add the decimal values as indicated and then convert to hexadecimal using the hexadecimal chart in Appendix B.
The hexadecimal values represent the control value digits entered into the PLC.
DESCRIPTION OPTION VALUE
BYTE 1: Display Mode and Display Speed
A) DISPLAY MODE 0 TO 22
B) DISPLAY SPEED Fastest
Fast
Slow
Slowest 128
160
192
224
A
B
Field 6 Byte 1 (Decimal):
Field 6 Byte 1 (Hex):
C: A + B
D: Hex(C)
DESCRIPTION OPTION VALUE
BYTE 2: Text Height and Relay Status
E) CHARACTER HEIGHT 0
8
F) RELAY STATUS ON
OFF 192
128
E
F
Field 6 Byte 2 (Decimal):
Field 6 Byte 2 (Hex):
2.1”
4.8”
G: E + F
H :Hex(G)
BYTE 3: Reserved for Future Enhancements
Field 6 Byte 3 (Hex): 80
(Always)