Rockwell Automation 2706-F11J_F11JC_F21J_F21JC DL50 INSTALLATION MANUAL - Manual (Page 53)

Chapter 5
Serial Communications
5–3
Field 3: Optional Display Mode
This optional field indicates how the message text is to be displayed. If this
optional byte is not present, the Line Number (field 5) determines the display
mode. The following control characters are used:
Table 5.C
Display Mode Control Characters
Control Character
Decimal
Value
Display Mode ➀
Ctrl-A 1 Hold
Ctrl-B 2 Flash
Ctrl-C 3 Scroll
Ctrl-D 4 Roll Up
Ctrl-E 5 Roll Down
Ctrl-H 8 Roll Right
Ctrl-I 9 Roll Left
Ctrl-K 11 Wipe Up
Ctrl-L 12 Wipe Down
Ctrl-N 14 Wipe Left
Ctrl-O 15 Wipe Right
➀ Refer to Appendix A for display descriptions.
Simplex Protocol (continued)