Rockwell Automation 8720MC High Performance Drives Installation Manual - Manual (Page 42)

Publication 8720MC-IN001D-EN-P — December 2002
2-8 8720MC Connector Data
Figure 2.5
Pin Orientation for P1, P4, and P5 (Analog) Connectors
TB4 Connector Pin-out
The following table provides the signal descriptions and pin-out for
the TB4 connector. Refer to figures 2.1 or 2.3 for connector pin
locations. Refer to Power Interconnect Diagrams in Appendix B for
interconnect diagrams.
P1
Analog Commands
Motor Feedback
P4
Analog Outputs and
Registration
Inputs
P5
Customer Logic Interface/
A quad B Output
8720MC Control Board
TB4
Pin
Description Signal
1
+24V dc, 1.25A Auxiliary Logic Power
(user supplied)
+24V dc
2 +24V dc Auxiliary Logic Power Common +24V dc_Com