Rockwell Automation 8720MC High Performance Drives Installation Manual - Manual (Page 78)

Publication 8720MC-IN001D-EN-P — December 2002
3-16 Connecting Your 8720MC
ATTENTION
!
This drive contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. You are required to
follow static control precautions when you install,
test, service, or repair this assembly. If you do not
follow ESD control procedures, components can be
damaged. If you are not familiar with static control
procedures, refer to Allen-Bradley publication
8000-4.5.2, Guarding Against Electrostatic Damage
or any other applicable ESD Protection Handbook.
ATTENTION
!
To avoid personal injury and/or equipment damage,
ensure installation complies with specifications
regarding wire types, conductor sizes, branch circuit
protection, and disconnect devices. The National
Electrical Code (NEC) and local codes outline
provisions for safely installing electrical equipment.
To avoid personal injury and/or equipment damage,
ensure motor power connectors are used for
connection purposes only. Do not use them to turn
the unit on and off.
To avoid personal injury and/or equipment damage,
ensure shielded power cables are grounded to
prevent potentially high voltages on the shield.