Rockwell Automation 2080 Micro800 Digital and Analog Plug-in Modules - Manual (Page 10)

2 Rockwell Automation Publication 2080-UM004B-EN-E - December 2013
Chapter 1 Micro800 Plug-in Modules
Number of support for Micro800 plug-ins on the controllers are summarized in
the following table.
Digital Plug-ins 12/24V Digital Plug-ins — 2080-IQ4, 2080-IQ4OB4, 2080-IQ4OV4,
2080-OB4, 2080-OV4
These digital plug-in modules provide transistor outputs for switching a variety
of 12/24V DC voltages to field loads and for detecting 12/24V signals from field
devices.
2080-OF2 Analog 2-channel, Non-isolated unipolar voltage/current
analog output
2080-TC2 Specialty 2-channel, non-isolated thermocouple module
2080-RTD2 Specialty 2-channel, non-isolated RTD module
2080-MEMBAK-RTC
(1)
Specialty Memory backup and high accuracy RTC
2080-TRIMPOT6 Specialty 6-channel trimpot analog input
2080-MOT-HSC Specialty High speed counter
2080-DNET20 Communication 20-node DeviceNet scanner
2080-SERIALISOL Communication RS232/485 isolated serial port
(1) 2080-MEMBAK-RTC is not supported on Micro820 controllers.
Plug-in Slots on Micro800 Controllers
Controller Number of Plug-in Slots
Micro810 0
Micro820 2
Micro830 2 (10/16 points)
3 (24 points)
5 (48 points)
Micro850 3 (24 points)
5 (48 points)
ATTENTION: Removal and Insertion Under Power (RIUP) is not supported
on all Micro800 plug-in modules, except on the 2080-MEMBAK-RTC
module.
ATTENTION: Micro800 plug-in modules can be installed on any plug-in
slot on the controller, except for the 2080-MEMBAK-RTC module which
can only be installed on the leftmost plug-in slot.
Micro800 Plug-in Modules
Module Type Description