Rockwell Automation 2080 Micro800 Digital and Analog Plug-in Modules - Manual (Page 12)

4 Rockwell Automation Publication 2080-UM004B-EN-E - December 2013
Chapter 1 Micro800 Plug-in Modules
Status Indicators
Project Backup and Restore
The project can be backed up and restored using Connected Components
Workbench software.
Six-channel Trimpot — 2080-TRIMPOT6
This trimpot plug-in offers an affordable method of adding six analog presets for
speed, position and temperature control.
High Speed Counter — 2080-MOT-HSC
This plug-in module provides enhanced high speed counter capabilities to the
Micro800 controller. It supports the same functionalities of an embedded HSC
on the Micro800 controllers but is enhanced to support up to 250 KHz 5V
differential line driver for improved noise immunity and provides additional
dedicated I/O.
For more information, see High Speed Counter – 2080-MOT-HSC on page 25 .
Communication Plug-ins RS232/RS485 Isolated Serial Port — 2080-SERIALISOL
The 2080-SERIALISOL plug-in supports CIP Serial (RS-232 only), Modbus
RTU (RS232 and RS485), and ASCII (RS232 and RS485
(1)
) protocols. Unlike
the embedded Micro800 serial port, this port is electrically isolated, making it
ideal for connecting to noisy devices, such as variable frequency and servo drives,
State Description
Solid red (2 s) Startup cycle test in progress.
Flashing red Back up in progress.
Solid red (continuous) Battery low.
45068
Channels
0 1 2
3 4 5
(1) RS-485 support is only available from Connected Components Workbench revision 6.