Communication plug-in modules – Rockwell Automation 2080 Micro800 Digital and Analog Plug-in Modules User Manual
Page 79
Rockwell Automation Publication 2080-UM004B-EN-E - December 2013
71
Specifications Appendix A
Communication Plug-in
Modules
Certifications – 2080-MOT-HSC
Certification (when
product is marked)
(1)
Value
c-UL-us
UL Listed Industrial Control Equipment, certified for US and Canada. See
UL File E322657.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations,
certified for U.S. and Canada. See UL File E334470.
CE
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM
Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
KC
Korean Registration of Broadcasting and Communications Equipment,
compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) See the Product Certification link at
for
Declarations of Conformity, Certificates, and other certification details.
Specifications – 2080-DNET20
Attribute
Value
Screw torque
Torque Specifications for the 2080-DNET20 Plug-in
Dimensions, HxWxD
62 x 31.5 x 20 mm (2.44 x 1.24 x 0.78 in.)
Weight
35 g
DeviceNet communication rate, max 125 Kbps – 420 m (1378 ft.)
250 Kbps – 200 m (656 ft.)
500 Kbps – 75 m (246 ft.)
Number of nodes, max
20 nodes for I/O operation
Network Protocol
I/O Slave Messaging: Poll Command
DeviceNet Status indicators
Module status – red/green
Network status – red/green
Enclosure type rating
Meets IP20
Backplane power consumption
50 mA @ 24V DC
DeviceNet current
24V DC, 300 mA Class 2
Power dissipation, max
1.44 W
Isolation voltage
50V (continuous)
Type tested for 60 s @ 500V AC
Wire size
0.25... 2.5 mm
2
(24...14 AWG) solid or stranded copper wire
rated @ 75 °C (167 °F ), or greater, 1.2 mm (3/64 in.)
insulation max
Wire category
1 – on power ports
North American temp code
T4
Preferred power supply
1606-XLSDNET4