2 - install and wire your module, Install and wire your module, Hardware features – Rockwell Automation 2080 Micro800 Digital and Analog Plug-in Modules User Manual
Page 15: Insert module into controller, Chapter 2, Hardware features insert module into controller, Chapter
Advertising
Rockwell Automation Publication 2080-UM004B-EN-E - December 2013
7
Chapter
2
Install and Wire Your Module
This chapter provides hardware features, installation, and wiring connection
diagrams for all the Micro800 plug-in modules.
Hardware Features
The plug-in modules, except for the 2080-MEMBAK-RTC, can be plugged into
any plug-in slots on the Micro800 controllers.
Insert Module into
Controller
Follow the instructions to insert and secure the plug-in module to the controller.
45010
terminal
block
mounting screw
hole
mounting
screw hole
20
(0.79)
31.5
(1.24)
62
(2.44)
Measurements in millimeters (inches)
45811
Side view
Front view
2080-RTD2 shown
45012
Advertising