Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 110)

Using Network Diagnostics
8-1
8
Using Network Diagnostics
Chapter Objectives
You can see what devices are on your communication link and display diagnostic
information for those devices. For example, you can monitor the number of
messages sent between your processor and another device on your link.
This chapter explains how to see what devices are on your local DH+ or Ethernet
link and how to display diagnostic counters for those devices.
Note Before you try to access the network diagnostics, make sure you have configured
DH+ or Ethernet communications for your programming terminal.
Accessing Network Diagnostics
To use network diagnostics, do the following:
Network
Diagnostics
Press a function key.
Main Menu
F4
6 2 0
Table 8.A
Available Function Keys on the Network Diagnostics Screen
If you want to: Press this key:
Show all stations (0-77) on DH+
F2
Who Active
Test communications to specific station number
F3
Diagnostic Loop Test