Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 149)

Generating and Printing Reports
10-15
Table 10.K
Printer Driver Name File Menu
If you want to: Press this key:
Enter printer name with as many as eight characters. This field cannot be
modified after you save the file.
F1
Printer Device Name
Enter a printer description with as many as 50 characters. This field
cannot be modified after you save the file.
F2
Printer Device Desc
Select IBM Graphics character set for ladder report. Toggle between yes
and no.
F3
Use IBM Graphics
Select to print all descriptive text above instructions with multiple
operands. Toggle between yes and no.
F4
Allows Enhanced Mode
Specify height and width of paper to be used.
F6
Paper Type (w/h)
Enter characters per inch for codes specified by
Ctrl F1 F6
Normal Characters/Inch
Enter characters per inch for codes specified by
Ctrl F3 F7
Compressed Characters/Inch
Specify lines per inch that will fit on page.
F8
Lines Per Inch
Set printer initialization once at start of report.
F9
Print Initialize
Enter codes to set characters per inch in compressed mode. Enter
control codes in decimal format separated by spaces.
For example, the decimal code for the ESC character is 27. See your
printer manual for control codes and their decimal representation.
Ctrl F1
Compressed Print
Enter codes to set characters per inch in normal mode. Enter control
codes in decimal format separated by spaces.
For example, the decimal code for the ESC character is 27. See your
printer manual for control codes and their decimal representation.
Ctrl F2
Normal Print
Enter codes to set characters per inch in expanded mode. Enter control
codes in decimal format separated by spaces. These codes are only
used to print rung numbers on the ladder diagram.
For example, the decimal code for the ESC character is 27. See your
printer manual for control codes and their decimal representation.
Ctrl F3
Expanded Print