Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 41)

Preface
ControlGuardian User’s Guide
3-10
Configuring a 1784-KT/KT2 (DH+)
Use the 1784-KT/KT2 (DH+) option if you want to connect a programming
terminal directly to a processor, to a local DH+ link, or for programming over a
remote DH+ link. Table 3.F lists when to use which communication card.
Table 3.F
Selecting a Communication Card
If you use a: Use this communication card:
DOS-based IBM â or IBM-compatible
programming terminal
1784-KT
IBM microchannel programming terminal 1784-KT2