Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 99)

Backing Up Files
6-5
Backing Up Production Files
ControlGuardian can back up 999 production files. For example, if you configure
ControlGuardian to save 10 backup files, then the first 10 files uploaded from a
processor to the production directory will have a backup file. The backup files are
saved under the current project name with a three-digit extension. The higher the
extension number, the more recent the backup.
Note You can back up both your master files and your production files. If you configure
the software to back up your production files, insert a production file into the master
library, then the backup versions of the production file will also be inserted into the
master library. If you have configured the master file backup paths, the files will be
backed up again when the system performs the master file backup.
Figure 6.2
Production Upload Backup Files
File “x”.001-.999
Upload
Directory
\IPDS\CTLGUARD\UPLC#
File “x”
Insert a program from a processor
into the production directory.
Specify the number of production
files you want to back up. The
production backup file is assigned
the file name and a 3-digit extension
number.
The backup production files are stored in the C:\IPDS\CTLGUARD\UPLC x directory
for processor files, in the C:\IPDS\CTLGUARD\UPV directory for PanelView 1200
files, and in the C:\IPDS\CTLGUARD\USLC directory for SLC 500 files.