Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 80)

Comparing Files
5-1
5
Comparing Files
Chapter Objectives
With ControlGuardian, you can upload your ladder logic programs and compare
them to approved master files. If the contents of the file are different than the
master file, ControlGuardian alerts you. You can perform a single action or a batch
action. Batch actions can be placed on a schedule so you can fit actions into
different scenarios. This chapter explains how to:
· perform a single action
· compare parts of a processor memory file
· create, modify, and run a batch file and perform an auto batch
· create, modify, and run a schedule file
Using Single Action
You use the single action function to compare an approved master file to a processor
file. To perform a single action, do the following:
F2
Main Menu
Single
Action
Use function keys to
configure comparison
parameters.
See Figure 5.A.
Press
F8 to execute
the compare.
¬
-
6 2 0
Note ControlGuardian displays the function key for choosing the report type when the
action type includes a compare action.