Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 57)

Preface
ControlGuardian User’s Guide
3-26
Configuring an A-B 1784-KR
For information on the configuration characteristics for A-B 1784-KR, see
Table 3.T.
Table 3.T
Configuration Characteristics for A-B 1784-KR
If you want to: Press this key:
Assign a unique communication device name (1-8 characters). This
field must be defined for the software to accept the configuration.
You cannot modify this field. The communication device name that
you assign appears at the top of the screen when you use WHO.
F1
Device Name
Assign a description for a communication device (1-50 characters).
You must define this field for the software to accept
the configuration.
F2
Enter Device Description
Select the A-B 1784-KR option.
F3
Select Interface Hardware
Assign a timeout for processor reply. Available choices are: 15, 20,
25, 30, 35, 40, 45, 50, 55 and 60 seconds. The default is
20 seconds.
F4
Online Wait for Reply
Choose the 1784-KL communications board address. You can
choose from the following:
·C000H
· E000H (000111)
·C800H · E800H (010111)
·D000H
·D800H
F5
KR Memory Address
Define a communication rate to send information. Toggle through
300, 600, 1200, 2400, 4800, 9600 and 19200 baud rates. The
default is 19200 baud.
F6
Baud Rate
Choose the KR I/O board address. you can choose from 2A8, 2B8,
2E8, 300, 320, and 360. The default is 300.
F7
KR I/O Board Address
Choose the KR interrupt number. You can choose from 2, 3, 4,
and 5. The default is 5.
F8
KR Interrupt Number
Enter the source station address (decimal).
F1 Ctrl
Computer Station Address