Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 56)

Configuring Communications
3-25
Configuring an A-B 1784-KL with a S5-103 Cable
For information on the configuration characteristics for A-B 1784-KL with a S5-103
Cable, see Table 3.S.
Table 3.S
Configuration Characteristics for A-B 1784-KL With S5-103 Cable
If you want to: Press this key:
Assign a unique communication device name (1-8 characters). This
field must be defined for the software to accept the configuration.
You cannot modify this field. The communication device name that
you assign appears at the top of the screen when you use WHO.
F1
Device Name
Assign a description for a communication device (1-50 characters).
You must define this field for the software to accept
the configuration.
F2
Enter Device Description
Select the A-B 1784-KL with S5-103 Cable option.
F3
Select Interface Hardware
Assign a timeout for processor reply. Available choices are: 15, 20,
25, 30, 35, 40, 45, 50, 55 and 60 seconds. The default is
20 seconds.
F4
Online Wait for Reply
Define a communication rate to send information. Toggle through
300, 600, 1200, 2400, 4800, 9600 and 19200 baud rates. The
default is 19200 baud.
F6
Baud Rate
Enter the source station address (0-377 octal).
F1 Ctrl
Computer Station Address