Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 58)

Configuring Communications
3-27
Configuring an A-B 1784-PCMK with a S5-104 Cable
For information on the configuration characteristics for A-B 1784-PCMK with a
S5-104 Cable, see Table 3.U.
Table 3.U
Configuration Characteristics for A-B 1784-PCMK With S5-104 Cable
If you want to: Press this key:
Assign a unique communication device name (1-8 characters). This
field must be defined for the software to accept the configuration.
You cannot modify this field. The communication device name that
you assign appears at the top of the screen when you use WHO.
F1
Device Name
Assign a description for a communication device (1-50 characters).
You must define this field for the software to accept
the configuration.
F2
Enter Device Description
Select the A-B 1784-PCMK with S5-104 Cable option.
F3
Select Interface Hardware
Assign a timeout for processor reply. Available choices are: 15, 20,
25, 30, 35, 40, 45, 50, 55 and 60 seconds. The default is
20 seconds.
F4
Online Wait for Reply
Choose the 1784-PCMK communications board address. You can
choose from the following:
·A300H (A3)
· CB00H (CB)
·A700H (A7) · CF00H (CF)
·AB00H (AB) · D300H (D3)
·AF00H (AF) · D700H (D7)
·B300H (B3) · DB00H (DB)
·B700H (B7) · DF00H (DF)
·BB00H (BB) · E300H (E3)
·BF00H (BF) · E700H (E7)
·C300H (C3) · EB00H (EB)
·C700H (C7)
F5
PCMK Communications
Board Addr
Define a communication rate to send information. Toggle through
300, 600, 1200, 2400, 4800, 9600 and 19200 baud rates. The
default is 19200 baud.
F6
Baud Rate
Enter the source station address (decimal).
F1 Ctrl
Computer Station Address