Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 89)

Preface ControlGuardian User’s Guide
5-10
Figure 5.C
Configure Auto Batch Parameters
If you want to: Press this key:
Select the device type to which the uploaded file will be compared.
Choose between PLC-5, PLC-3, PLC-2, SLC 500, or PLC-5, PLC-3,
PLC-2, and SLC 500. The default is PLC-5.
F1
Device Type to Upload
Use the WHO active screen to select a station. When you select WHO
active, ControlGuardian displays a map of the devices on link. Move the
cursor to the device you want to upload from and press
and
F1
ControlGuardian inserts the station number for your compare action.
F2 Ctrl
WHO Active
Select the communication hardware device. For more information, see
chapter 3.
F3
Communications Device
Select the report configuration.
This file defines how the report should print. To create a new report
format, see chapter 10.
F4
Report Format
Select a report type:
·ladder logic
·data table
·ladder logic and data table
F5
Report Type
Select the action type:
·Upload & Compare - uploads the working program from the selected
processor and compares it to the master file.
·Upload Only - uploads the working program from the selected
processor and places the file in the production directory.
·Upload/B-Compare - uploads the working program from the processor
and binary compares the ladder logic to the ladder logic in the master
file. Creates an AUTO.ERR file to record matches and mismatches.
·Upload/Smart Compare - uploads the working program from the
processor and binary compares it to the master file. Generates a
detailed compare report if the ladder logic from the working file and the
master file mismatch.
F6
Action Type