Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 52)

Configuring Communications
3-21
Configuring a 1784-PCMK (DH+)
Use the 1784-PCMK (DH+) option if you want to connect a programming terminal
directly to a processor, to a local DH+ link, or for programming over a remote DH+
link. Use the 1784-PCMK option (DH+) if you are using a PCMIA programming
terminal (notebook computer).
For information on the configuration characteristics for 1784-PCMK (DH+), see
Table 3.P.
Table 3.P
Configuration Characteristics for the 1784-PCMK (DH+)
If you want to: Press this key:
Assign a unique communication device name (1-8 characters). This
field must be defined for the software to accept the configuration.
You cannot modify this field. The communication device name that
you assign appears at the top of the screen when you use WHO.
F1
Device Name
Assign a description for a communication device (1-50 characters).
You must define this field for the software to accept
the configuration.
F2
Enter Device Description
Select the 1784-PCMK (DH+) option.
F3
Select Interface Hardware
Assign a timeout for processor reply. Available choices are: 15, 20,
25, 30, 35, 40, 45, 50, 55 and 60 seconds. The default is
20 seconds.
F4
Online Wait for Reply
Choose the 1784-PCMK communications board address. You can
choose from the following:
·A300H (A3)
· CB00H (CB)
·A700H (A7) · CF00H (CF)
·AB00H (AB) · D300H (D3)
·AF00H (AF) · D700H (D7)
·B300H (B3) · DB00H (DB)
·B700H (B7) · DF00H (DF)
·BB00H (BB) · E300H (E3)
·BF00H (BF) · E700H (E7)
·C300H (C3) · EB00H (EB)
·C700H (C7)
F5
PCMK Communications
Board Addr
Enter a name for a programming terminal (1-8 characters). This
name appears next to the station number and device on the WHO
active screen.
F6
Term Name
(Continued)