Runningabatchfile, Running a batch file – Rockwell Automation 9330-CC ControlGuardian User's Guide User Manual
Page 90
Comparing Files
5-11
Running a Batch File
To run a batch file, do the following:
Main Menu
Batch
Action(s)
F3
Run Batch
F3
Press
Enter
¬
-
Select the batch file
you want to run
using the
keys.
2 0
The system displays a window showing the data table files/words, program
files/words, and force/configuration files/words being uploaded from the batch files.
When the batch file is finished, the system returns to the batch comparison menu.
ControlGuardian records the batch results in a batch log file. The log file has the
same name as the batch file and uses a file specifier of .LOG. To view the log file,
select
F5
on the batch action menu or use the view reports function and select the
log file.
To run a batch file from the command line, type:
CG batch_file_name.BAU
Enter
Application tip
Application tip