English, 3 branch circuit protection devices, 4 input power conditioning – Rockwell Automation SP120 ACDrive 115VAC, 1Ph, 230VAC, 1Ph/3Ph, 1/4-5.0HP User Manual
Page 19
Installing and Wiring the Drive
2-5
English
2.4.3 Branch Circuit Protection Devices
The following table shows the minimum recommended values for the branch circuit
protection devices:
2.4.4 Input Power Conditioning
The drive is suitable for connection to input power within the rated voltage of the drive
(see specifications). The power factor of the input power supply must not exceed .99.
Compensation systems must ensure that overcompensation does not occur at any
time.
If the drive must be installed in any of the following conditions, a 3% impedance input
line reactor must be used:
•
line has intermittent noise spikes in excess of 2000 V
•
frequent voltage dips occur
•
the drive is operated on a generator
•
line has power factor correction capacitors
•
several drives are linked via a short common power supply bus bar
Table 2.2 – Branch Circuit Protection
Fuse Rating (Class J)
Circuit Breaker Type
Model
Single-Phase
Three-Phase
Single-Phase
Three-Phase
S12-101P4LU
10A
N/A
140M-D8N-C10
N/A
S12-102P6LU
15 A
N/A
140M-D8N-C16
N/A
S12-104P0LU
20 A
N/A
140M-D8N-C25
N/A
S12-201P4LU
10 A
10 A
140M-D8N-C10
140M-D8N-B40
S12-202P6LU
10 A
10 A
140M-D8N-C10
140M-D8N-B63
S12-203P0LU
10 A
10 A
140M-D8N-C10
140M-D8N-B63
S12-204P0LU
15 A
15 A
140M-D8N-C16
140M-D8N-C10
S12-205P0LU
15 A
15 A
140M-D8N-C16
140M-D8N-C10
S12-207P1LU
20 A
15 A
140M-D8N-C16
140M-D8N-C16
S12-20010LU
30 A
20 A
140M-D8N-C25
140M-D8N-C16
S12-20015LU
N/A
30 A
N/A
140M-D8N-C25
S12-401P5LU
N/A
3 A
N/A
140M-D8N-B25
S12-402P5LU
N/A
6 A
N/A
140M-D8N-B40
S12-403P8LU
N/A
10 A
N/A
140M-D8N-B63
S12-405P5LU
N/A
10 A
N/A
140M-D8N-C10
S12-408P6LU
N/A
15 A
N/A
140M-D8N-C16