Rockwell Automation SP120 ACDrive 115VAC, 1Ph, 230VAC, 1Ph/3Ph, 1/4-5.0HP - Manual (Page 33)

Parameters and Programming 3-3
English
3.1.1 Programming Examples
This section contains four different programming examples to help describe how to
program the SP120 drive.
Initial Power Up
This example shows you how to proceed from the power up parameter value to the
parameter number.
Action Description Display
Apply power to the drive
If you were viewing a display parameter when power was last
removed from the drive, the same display parameter value will
reappear when the drive is re-powered. If you were viewing any
other parameter value when power was removed, the
parameter group or parameter number will appear when the
drive is re-powered.
0.0
Press PROGram to switch from the parameter value to the
parameter number. d01
PROG