Rockwell Automation SP120 ACDrive 115VAC, 1Ph, 230VAC, 1Ph/3Ph, 1/4-5.0HP - Manual (Page 34)

3-4 SP120 AC Drive Installation and Operation
English
Scrolling through parameter groups
This example shows you how to check a parameter value without changing the value
of the parameter. For this example, the operation of C21 [
DIGITAL OUTPUT 11] is
verified.
Action Description Display
Press Up Arrow or Down Arrow to scroll through the
parameter groups, stopping at the C group.
Note: All of the d and F group parameters are
displayed in sequence, but the A, b, and C
parameters are grouped and the group must be
selected to view the parameters within that specified
group. Figure 3.1 details which parameters are in
each group.
C--
Press PROGram to enter into the C group. C01
[
DIGITAL INPUT 1] should appear on the display.
Note: When parameter groups are entered, the
number of the parameter that was being viewed
when you last exited the group will be displayed.
C01
Press Up Arrow to scroll through the parameters
contained within the group, continue pressing Up
Arrow until C21 [
DIGITAL OUTPUT 11] is displayed.
Note: When viewing parameters within the A, b and
C groups the parameters will wrap from A01 through
C91 by pressing Up Arrow or Down Arrow. To view
parameters within the d and F groups, press SELect
until the display shows A - -, b - - or C- -. Once the
group letter is displayed, Up Arrow or Down Arrow
will scroll to the d and F parameters.
C21
Press PROGram to view the parameter value stored
in C21 [
DIGITAL OUTPUT 11].
01
Press PROGram again to exit from the parameter
value back to the parameter number without
changing the stored value. C21
Press PROGram again to exit from the parameter
number to the parameter group display. C--
PROG
PROG
PROG
PROG