Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 105)

Publication IASIMP-QS001C-EN-P - October 2009 105
Create a Project Using RSLogix 5000 Programming Software Chapter 10
Add Local I/O Modules
All controllers
1. Right-click CompactBus Local and
select New Module.
2. Select the leftmost
I/O module in the
1769 CompactLogix
chassis and assign a
slot number, then
click OK.
3. In the Name box,
type a name and
click OK.
The module is added to the I/O
Configuration.
4. Repeat steps 1 – 3 until all of your local I/O
modules are added in order from left to
right.
Do not add the 1769-SDN module. It is
added on
page 111 .