Create devicenet tags, Create devicenet, Tags – Rockwell Automation 1769-L3xx CompactLogix System Quick Start User Manual
Page 174
Advertising
174
Publication IASIMP-QS001C-EN-P - October 2009
Chapter 13 Create a PowerFlex 40 Application
Create DeviceNet Tags
DeviceNet only
(to complete this step for EtherNet/IP or ControlNet, see
1. In RSLogix 5000 programming software, from the
Tools menu, choose DeviceNet Tag Generator.
2. Select the RSLogix 5000 project.
3. Click Select
Scanner.
4. Select the 1769-SDN scanner that
scans the network where the drive is
located.
5. Click Select RSNetWorx Project.
6. Select DeviceNet configuration file recorded on
the
7. Click Select Scanner Node.
IMPORTANT
Before running the DeviceNet Tag Generator, verify that
RSNetWorx for DeviceNet software is closed.
Advertising