Create a powerflex 70 application, Before you begin, What you need – Rockwell Automation 1769-L3xx CompactLogix System Quick Start User Manual
Page 143: Chapter 12, Create a powerflex 70, Application, Before you begin what you need
Advertising
143
Publication IASIMP-QS001C-EN-P - October 2009
143
Chapter
12
Create a PowerFlex 70 Application
In this chapter, you configure a PowerFlex 70 drive and add the drive to the RSLogix 5000
project created in
. You also download the project to the controller so you can test
communication with the drive.
Before You Begin
•
Prepare the PowerFlex 70 drive and network adapter, see
•
Create a project using RSLogix 5000 programming software, see
What You Need
•
For an EtherNet/IP network, no additional software is needed
•
For a ControlNet network, RSNetWorx for ControlNet software
•
For a DeviceNet network, RSNetWorx for DeviceNet software
Advertising