Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 42)

42 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 2 Prepare the Computer
Load Firmware
Required for all packaged controllers
TIP
This example shows how to load firmware using a serial connection. It is faster to load firmware
via an EtherNet/IP or ControlNet connection. For more information, see the installation
instructions for the controller as listed at the end of the chapter.
1. Launch ControlFlash software.
2. Click Next.
3. Select the controller catalog
number and click Next.