Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 38)

38 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 2 Prepare the Computer
Set the IP Address for the Computer
Required for all controllers, regardless of network choice
1. On your desktop, right-click My
Network Places and select
Properties.
2. Double-click the Local Area
Connection.
3. Click Properties.
4. On the General tab, select Internet
Protocol (TCP/IP) and click
Properties.
5. Select Use the following IP address
and enter an IP address and Subnet
mask for your computer using the
example shown or enter your own
address.
For more information about selecting
an IP Address, see
page 81 .
6. Click OK.
7. Record the IP address and subnet mask in the Network Worksheet on the back cover.
8. Click OK.