Prepare the distributed point i/o hardware, Before you begin, What you need – Rockwell Automation 1769-L3xx CompactLogix System Quick Start User Manual
Page 47: Chapter 3, Prepare the distributed, Point i/o hardware, Before you begin what you need
47
Publication IASIMP-QS001C-EN-P - October 2009
47
Chapter
3
Prepare the Distributed POINT I/O Hardware
In this chapter, you install the 1734 POINT I/O network adapter and the 1734 POINT I/O
modules.
Before You Begin
•
Determine which of these network adapters to use:
– for an EtherNet/IP network (option 1), use the 1734-AENT adapter.
– for a ControlNet network (option 2), use the 1734-ACNR adapter.
– for a DeviceNet network (option 3), use the 1734-ADN adapter.
•
Select the appropriate mounting base for I/O modules:
– if you use a 1734-IT2I module, then use the 1734-TBCJC.
– for all other I/O modules use the 1734-TB or 1734-TBS.
What You Need
•
POINT I/O adapter: 1734-AENT, 1734-ACNR, and/or 1734-ADN
•
POINT I/O mounting bases: 1734-TB or 1734-TBS, and 1734-TBCJC
•
A digital-output POINT I/O module: The examples use a 1734-OB4E, however, other
POINT I/O modules can also be used, but are not required
•
Power supply: 1794-PS3 or 1794-PS13