Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 189)

189 Publication IASIMP-QS001C-EN-P - October 2009 189
Chapter
14
Create a PanelView Plus Application
In Chapter 10 , you used ladder logic in the RSLogix 5000 programming software to create a
push button that controlled an LED indicator on a digital output module. In this chapter you
create a push button and a multi-state indicator in FactoryTalkView software that use that
ladder logic. You also transfer the application to the PanelView Plus so you can test
communication with the controller.
Before You Begin
• Prepare the PanelView Plus, see Chapter 6
•
Create a project in RSLogix 5000 programming software, see Chapter 10
What You Need
• FactoryTalkView Machine Edition software