Test the indicator and push button, Test the indicator, And push button – Rockwell Automation 1769-L3xx CompactLogix System Quick Start User Manual
Page 205: All controllers
Advertising
Publication IASIMP-QS001C-EN-P - October 2009
205
Create a PanelView Plus Application Chapter 14
Test the Indicator and Push Button
All controllers
5. Click the Play button.
1. Verify that the keyswitch on your
controller is moved to Run.
2. Right-click an unused area of the
display and select Display
Settings.
3. Change the Maximum Tag
Update Rate to 0.05.
4. Click OK and then click OK
again.
Advertising