Mount the powerflex 70 drive, Wire power, Mount the powerflex 70 drive wire power – Rockwell Automation 1769-L3xx CompactLogix System Quick Start User Manual
Page 57: Mount the, Powerflex 70 drive, L1 r, L2 s, V ac com, Chassis ground, Optional lim 240v ac 3-phase load connector motor
Publication IASIMP-QS001C-EN-P - October 2009
57
Prepare the PowerFlex 70 Drive Chapter 4
Mount the PowerFlex 70 Drive
For the purpose of this quick start, the PowerFlex 70 drive can be propped in a safe and
convenient location.
For mounting instructions, see the PowerFlex 70 Drive User Manual, publication
Wire Power
1. Loosen the screw and remove the cover.
2. Loosen the screws and slide the metal plate out
of the drive.
3. Connect the 120/240V AC, V AC COM and
chassis ground wires to the terminal block.
4. Replace the metal plate and tighten the screws.
Connect
To
120/240V AC
L1
R
V AC COM
L2
S
Chassis ground
PE
WARNING
Verify that all incoming power is
turned off before wiring power.
L1
R
L2
S
L3
T
BR1
+DC
BR2
BRK
T1
U
T2
V
T3
W
PE
PE
195-265 V
AC LINE, 50/60 Hz
L3
L2
L1
23
0 V
AC SUPPL
Y
CTRL2
CTRL1
195-265 V
AC LOAD, 50/60 Hz
L3'
L2'
L1'
CONTROL V
AC
AUX2
AUX2
AUX1
AUX1
I/O_COM
I/O_PWR
I/O_COM
I/O_PWR
I/O_COM
I/O_PWR
24 VDC SUPPL
Y
1 2
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4 5 6
AUX1
Optional LIM 240V
AC
3-Phase Load
Connector
Motor
fus
Top View