Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 193)

Publication IASIMP-QS001C-EN-P - October 2009 193
Create a PanelView Plus Application Chapter 14
The Local tab defines the path from the computer to the controller.
The Target tab defines the path from the PanelView Plus terminal to the controller.
Computer
Controller Terminal
Target Local
The computer needs to
communicate with the
controller when you are in
Test Run mode. This path is
defined on the Local tab. The PanelView Plus terminal
also needs to communicate
with the controller, but that is
sometimes a different path.
This path is defined on the
Target tab.