Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 136)

136 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
7. On the Connection Tab, uncheck
the Inhibit Module checkbox
and click OK.
8. Click Yes.
You have set the POINT I/O
chassis size.
9. Click Save.
For ControlNet, go to Schedule the ControlNet Network on page 137 .
For EtherNet, skip to Test the Distributed I/O Light on page 141 .