Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 55)

55 Publication IASIMP-QS001C-EN-P - October 2009 55
Chapter
4
Prepare the PowerFlex 70 Drive
In this chapter, you mount and wire power to a PowerFlex 70 drive. You also configure your
communication adapter and make network connections.
Before You Begin
Determine which network and appropriate adapter to use on the PowerFlex 70 drive:
• For an EtherNet/IP network (option 1), use the 20-COMM-E module.
• For a ControlNet network (option 2), use the 20-COMM-C module.
•
For a DeviceNet network (option 3), use the 20-COMM-D module.
What You Need
• PowerFlex 70 drive
• Communication adapter for use with the PowerFlex 70 drive: 20-COMM-E
(EtherNet/IP adapter), 20-COMM-C (ControlNet adapter), or 20-COMM-D
(DeviceNet adapter)