Add distributed i/o modules, Add distributed, I/o modules – Rockwell Automation 1769-L3xx CompactLogix System Quick Start User Manual
Page 115
Advertising
Publication IASIMP-QS001C-EN-P - October 2009
115
Add Distributed I/O Modules to the Project Chapter 11
Add Distributed I/O Modules
EtherNet/IP and ControlNet only
(for DeviceNet, skip to
3. Select the 1734 POINT I/O
network adapter and click OK.
1. Verify that your project is
Offline.
2. Right-click the network port
and select New Module.
EtherNet/IP
ControlNet
EtherNet/IP
ControlNet
For an EtherNet/IP
network, select a
1734-AENT adapter.
For a ControlNet
network, select a
1734-ACNR adapter.
Advertising