Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 149)

Publication IASIMP-QS001C-EN-P - October 2009 149
Create a PowerFlex 70 Application Chapter 12
Edit the Drive Parameters
EtherNet/IP and ControlNet only
(for a DeviceNet, skip to
page 150 )
1. In the drive organizer, double-click
Parameter List.
2. Enter the following parameters:
3. Click OK.
The parameters are loaded to the drive.
Parameter Name Value
Parameter 61 Autotune Ready
Parameter 90 Speed Ref A Sel DPI Port 5
Parameter 361 Digital In1 Sel Not Used
Parameter 362 Digital In2 Sel Not Used
Parameter 363 Digital In3 Sel Not Used
Parameter 364 Digital In4 Sel Not Used
Parameter 365 Digital In5 Sel Not Used
Parameter 366 Digital In6 Sel Not Used
4. Close the PowerFlex 70 Properties dialog.
If you are using a EtherNet network, go to Test the PowerFlex 70 Tags on page 161 .
If you are using ControlNet, go to Schedule the ControlNet Network on page 157 .