Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 186)

186 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 13 Create a PowerFlex 40 Application
5. Expand the
PowerFlex 40
output tag.
6. At the O.Start tag, enter 1.
WARNING
If there is a motor attached to your drive, completing the
next step will make it turn.
The display on the drive registers the
speed increase in Hz until the value
entered at the reference tag is reached.
7. Change the O.Start tag back to 0.
8. Change the O.Stop tag to 1.
The display on the drive will show a
speed decrease until the drive reaches 0.00 Hz.
9. Change the Stop tag back to 0.
10. Select Go Offline.