Rockwell Automation 1769-L3xx CompactLogix System Quick Start - Manual (Page 134)

134 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
Download the Project
EtherNet/IP, ControlNet, and DeviceNet
1. Save your changes.
4. Click Download.
If you have no loads wired to
your distributed output modules,
the red status LEDs indicators
may start blinking.
3. Click the Controller Status icon
and select Download.
If you are using ControlNet or EtherNet networks, after you download to the
controller, the 1734 modules show faults. Continue with
Set the POINT I/O Chassis
Size on page 135 .
If you are using DeviceNet, skip to Test the Distributed I/O Light on page 141 .
2. Move the keyswitch on your controller to Program.