Before you begin, What you need, Chapter 10 – Rockwell Automation 1769-L3xx CompactLogix System Quick Start User Manual
Page 99: Create a project using rslogix 5000, Programming software, Before you begin what you need
Advertising
![background image](/manuals/581433/99/background.png)
99
Publication IASIMP-QS001C-EN-P - October 2009
99
Chapter
10
Create a Project Using RSLogix 5000 Programming
Software
In this chapter you create a project in RSLogix 5000 programming software. In the project
you use ladder logic to create a push button that controls a light on a digital output module.
This project is used in subsequent chapters to test communication with other devices.
Before You Begin
•
Configure your network:
– for an EtherNet/IP network, see
– for a ControlNet network, see
– for a DeviceNet network, see
What You Need
•
A CompactLogix I/O module with digital outputs, this example uses a 1769-OB16.
•
This example includes the following modules as well, but they are not required:
1769-IF4, 1769-IQ16, 1769-IF4XOF2, 1769-OF2.
Advertising