Rockwell Automation AADvance Controller System Build - Manual (Page 72)

3-28 Document: 553632
(ICSTT-RM448_EN_P) Issue: 08:
System Build Manual (AADvance Controller)
Install Blanking Covers Install Blanking Covers Install Blanking Covers Install Blanking Covers
Install a blanking cover to each spare position on the base units.
Place the blanking cover on the base unit and use a broad (9mm) flat blade
screwdriver to turn the clamp screw 90° to the lock position.
Fit EMC Static Protection Covers Fit EMC Static Protection Covers Fit EMC Static Protection Covers Fit EMC Static Protection Covers
For EMC static protection you should fit the black plastic protection covers (supplied
with the base units) over any exposed 48 pin DIN connectors on the T9300 I/O Base
unit.