Rockwell Automation AADvance Controller System Build - Manual (Page 75)

Document: 553632
(ICSTT-RM448_EN_P) Issue: 08:
3-31
Tighten the screws with a 2.5mm Allen key.
Install the cable to the plug assembly and tighten the retaining screws by hand.
2) Connect the free end of the expansion cable to the left hand plug of an I/O base
unit using a cable socket assembly.
Insert a cable socket assembly into the left hand connector of the T9300
processor base unit.
Secure the socket assembly by inserting the two M3 socket cap screws.
Tighten the screws with a 2.5mm Allen key.
Install the cable to the socket assembly and tighten the retaining screws by
hand.