Brocade Communications Systems RFS6000 - Manual (Page 106)

104 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
show
2
static-channel-group
Common to all modes
Displays the members of the static channel groups
Supported in the following platforms:
• Mobility RFS7000 Controller
• Mobility RFS4000 Controller
NOTE
This command is not supported on the Mobility RFS6000 Controller
Syntax
show static-channel-group
Parameters
None
Example
RFController(config)#show static-channel-group
RFController(config)#