Brocade Communications Systems RFS6000 - Manual (Page 427)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 425
53-1001931-01
Interface config commands
12
spanning-tree
Interface config commands
Configures spanning tree parameters
Displays current system information running on the controller.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
spanning-tree [bpdufilter|bpduguard|edgeport|force-version|
guard|link-type|mst|portfast]
spanning-tree bpdufilter [enable|disable]
spanning-tree bpduguard [enable|disable]
spanning-tree [edgeport|portfast]
spanning-tree force-version <1-3>
spanning-tree guard root
spanning-tree link-type [point-to-point|shared]
spanning-tree mst [<1-15|port-cisco]
spanning-tree mst 1 [cost <>|port-priority <>]
spanning-tree mst port-cisco [enable|disable]