Brocade Communications Systems RFS6000 - Manual (Page 88)

86 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
show
2
power
Common to all modes
Displays the power configuration and status for the Mobility RFS6000 Controller controller
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
NOTE
This command is not supported on the Mobility RFS7000 Controller.
Syntax
show power [configuration|status]
Parameters
Example
RFController(config)#show power configuration
Power usage trap at 80% of max power (148 of 185 Watts)
port Priority Power limit Enabled
ge1 high 29.7W yes
ge2 high 29.7W yes
ge3 high 29.7W yes
ge4 high 29.7W yes
ge5 high 29.7W yes
ge6 high 29.7W yes
ge7 high 29.7W yes
ge8 high 29.7W yes
POE firmware version 01f6 build 4
RFController(config)#
configuration Displays configuration of power over ethernet
status Displays status of power over ethernet