Brocade Communications Systems RFS6000 - Manual (Page 353)

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 351
53-1001931-01
Chapter
8
Crypto-peer Instance
In this chapter
• Crypto Peer config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
The
(config-crypto-peer)
instance to configure ISAKMP peers. To enter this instance, use the
command:
RFController(config)#crypto isakmp peer [address|dn|hostname]
RFController(config-crypto-peer)#
Crypto Peer config commands
Table 8 summarizes the
config-crypto-peer
commands
TABLE 8 Crypto Peer Command Summary
Command Description Ref.
clrscr Clears the display screen page 352
end Ends the current mode and moves to the EXEC mode page 353
exit Ends the current mode and moves to the previous mode page 354
help Displays the system’s interactive help system page 355
no Negates a command or sets its defaults page 356
service Invokes service commands to troubleshoot or debug the
(config-crypto-peer) instance configuration
page 357
set Sets configuration parameters page 358
show Displays running system page 359